3D file Squid Game Doll – Dummy 13 1.0

3D model description
Hello, this is an articulated figure compatible with the dummy 13 v1.0 (not to be confused with the beta version) from the designer @soozafone

BEFORE DOWNLOAD !!!
To know if my design will work on your printer, you must make sure that you can print the dummy13 v1.0 correctly from the following link:

https://www.printables.com/model/981111-dummy-13-version-10/comments

My design replicates the same tolerances of the original design so if the original design works then my design will work too.

DUMMY 13 V1.O SQUID GAME DOLL ARTICULATED FIGURE BY 3DNUEVO DUMMY 13

Fully functional articulated figure. All the pieces snap together, if it feels loose then resize it in the laminator or use some superglue

It is recommended to print in good quality PETG or PLA+ filament

Size: 180mm approx; The size is equivalent to dummy13 scaled to 120%. I think it is an ideal size to not handle such small pieces for children.

The material consumption is approximately 65g approx and the printing time is 4H on bambulab A1 mini (it can be less if the parts are printed on more machines).

Compatible with hands and accessories of dummy 13 (scaled to 120%)

The assembly is similar to Dummy13, it has the same number of pieces. You can use the photos to guide you.

HOW TO PLACE THE EYES ?
1. Print a4 sheet included in the files (.PDF)
2. Cut and attach to head_face_back_side (use the photos as a guide)
3. insert in head_face (use the photos as a guide)
4. Adjust the eyes
5. Place the nape of the neck, bangs and neck

Always available on Instagram as 3dnuevo to answer questions and receive suggestions to improve the design

If you want to sell the prints please subscribe to my patreon. selling the files is not allowed.

3D printing settings
Printer: Prusa MK3S / Bambulab
Laminator: Prusa Slicer / BambuStudio

PLA+/PETG PIECES
High Layer: 0.3 OR 0.28
infill: 10%
Suport: NO
Skirt: CHEST, AT CONVENIENCE