3D file Oga’s Cantina Light #2 Prop STL Inspired by Galaxy’s Edge Star Wars ⭐ ・3D printing idea to download・Cults

All Paid Levels of Patreon Members get 20% off all Etsy items and files ($1/month).
or Join Patreon 3d Member tier and get all my files soon as you join ($10)! (its a no brainer) 🙂
Want to print and sell my files? You can with the 3D Merchant Tier ($20)
https://patreon.com/WhiteysWickedWorkshop

This listing includes digital STL files only; no physical items will be shipped.
Ensure you have access to a 3D printer or 3D printing service.
Due to the digital nature of the product, refunds or exchanges are not available.

Dimensions (see pics):
– approx. 180mm tall x 440mm round
But you can scale it to your desires!

Items Needed (some are affiliate links):

QTY 1 – Bob Smith Superglue or equivalent: https://amzn.to/49vsGru
QTY 1 – 3/4″ Threaded Conduit Sized to your liking: https://www.lowes.com/pd/Wheatland-Tube-Metal-Rigid-10-ft-Conduit-Common-0-75-in-Actual-1-05-in/5002324695
QTY 1 – 3mm threaded rods with nuts (cut to approx. 91mm): https://amzn.to/3Wp6Py4
QTY 1 – Lamp Holder Socket: https://amzn.to/4jors7C
QTY 1 – 3/4″ Conduit locknut: https://amzn.to/3EdGigT
QTY 1 – 4″ LED Bulb: https://amzn.to/40qnimQ

Assembly:
– Print out all parts.
(BottomLens and Diffuser to be printed in Translucent material)
– Do a Dry Run / Test Fit before doing anything.

-Grab the parts marked Bottom (QTY6)
– Place BottomCap06 with smaller end opening on workbench.
– Place the BottomLens05 inside of the BottomCap06.
– Place the Bottom04 on top of that.
– Place the Bottom03 on top of that.
– Here is where it gets tricky.
– Grab the 3mm rods and place them through Bottom02 and add the nuts on bottom side.
– Then place that on top of the rest of the Bottom pieces.
– Place BottomUnderside01 on top of that.
– Place Diffuser on top of that.
– Attach Threaded 3/4 conduit through BulbConnectorPlate hole and tighten with nut.
– Add Lamp Holder socket to underside of BulbConnectorPlate and attach with two screws.
– Insert bulb
– Run the 3mm rods through the BulbConnectorPlate and fasten with nuts.
– Place Spacer over top of the conduit.
– Add the MiddleSaucer and then finally the TopSaucer

PROTIP’s:
1. Paint and let dry before handling.
2. Do a Dry Run / Test Fit before doing anything.
3. Do not over tighten the screws

Enjoy!

Please let me know of any issues.

Please do not share this file.

Please do not print and sell this item.

Please do not print and make a mold with the purpose of selling this item.

This is for Personal use only!

“For the Children!” 🙂

Whitey!

LinkTree = https://linktr.ee/WhiteysWickedWorkshop